Please use this identifier to cite or link to this item: https://hdl.handle.net/20.500.13087/2287
Title: Finite element analysis of different material models for polyurethane elastomer using estimation data sets
Authors: Sheikhi, Mohammad Rauf
Shamsadinlo, Behrang
Ünver, Özgür
Gürgen, Selim
Keywords: Finite element method
Data set estimation
Hyperelastic material
Polyurethane elastomer
Strain-Energy Function
Constitutive Model
Hyperelastic Models
Rubber
Elasticity
Behavior
Issue Date: 2021
Publisher: Springer Heidelberg
Abstract: When hyperelastic materials are included in a finite element analysis model, researchers generally have little adequate data to help them achieve their findings. Fortunately, data from tension or compression stress-strain testing are available for mostly researchers. This information must be analyzed and used to hyperelastic model studies. Curve fitting of these data is very crucial for determining the material constants. In the present study, first the experimental data sets were prepared and then used them to examine different hyperelastic material models by ANSYS. Experimental data of uni-axial tension, bi-axial tension, and pure shear tests are required to get an acceptable polynomial fit to the whole data set. Valanis-Landel (VL) method was utilized to estimate the shear and bi-axial data set by using the experimental uni-axial tension and uni-axial compression stress-strain data sets. The finite element analysis of specimens under uni-axial tension and pure shear tests were evaluated using four separate material models (Mooney-Rivlin, Ogden, neo-Hookean, and Gent). Each material model has a different form of strain energy density (SED) function. Constants of material models are extracted using a curve fitting tool utilizing the experimental data sets of uni-axial tension tests and the estimated data set of shear and bi-axial tests. These data sets were applied in different combinations (uni-axial tension + shear, uni-axial tension + bi-axial, shear + bi-axial, uni-axial tension + shear + bi-axial) to discover the material model constants. Finally, the best material model and combination form were selected. The optimal material model and combination form are picked at the end of the research. According to the results, Gent model rises as the best model for uni-axial stress testing, while neo-Hookean is the best choice for pure shear testing.
URI: http://doi.org/10.1007/s40430-021-03279-9
https://hdl.handle.net/20.500.13087/2287
ISSN: 1678-5878
1806-3691
Appears in Collections:Makine Mühendisliği Bölümü Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu
WoS İndeksli Yayınlar Koleksiyonu

Show full item record

CORE Recommender

Page view(s)

134
checked on Oct 3, 2022

Google ScholarTM

Check

Altmetric


Items in GCRIS Repository are protected by copyright, with all rights reserved, unless otherwise indicated.